EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is really a really productive solar controller suitable for off-grid photo voltaic units. Depending on multiphase synchronous rectification technological know-how, it ensures optimized energy conversion and method balance for an array of photovoltaic (PV) programs.
Key Functions of your EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller engineering for excellent photo voltaic Strength harvesting. Critical capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
Superior MPPT Algorithm with >99% performance.
Dual-Stage Charging for enhanced battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Handle Modes such as manual and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Stage-by-Phase Guidebook to Creating the EPEVER Tracer AN Sequence Controller
1. Unboxing and Planning the Controller
Guarantee all parts are incorporated: Tracer AN device, temperature sensor, conversation cables, and person handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a properly-ventilated, dry area close to the battery bank.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Caution: Always follow good basic safety protocols and ensure the program is powered off just before connecting factors.
Phase 1: Link the battery terminals towards the charge controller (favourable to constructive, detrimental to negative).
Action two: Link the photo voltaic panel array to your PV input terminals.
Step three: Link the load terminals if using More info a immediate load link.
Step 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Manual, timer, mild Manage.
five. Monitoring and Data Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 remote meter.
Facts might be logged via the RS485 interaction port making use of software program which include Solar Station Computer system.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Typical Difficulties
Issue one: No Electricity Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Effectiveness: Reduced Strength losses for the duration of conversion.
Enhanced Reliability: Secure functionality less than variable masses.
For a longer time Battery Lifestyle: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar energy technology and extending battery daily life. By following the above set up guideline, users can ensure maximum effectiveness and technique longevity.